BQPDW - SILVER DOLLAR ALUMINUM ROOF (SEE ING 14)
- MSDS: BQPDW
- Manufacturer: GARDNER ASPHALT CORP
- Product Name: SILVER DOLLAR ALUMINUM ROOF (SEE ING 14)
- National Stock Number: 5610-00N012291
Product Identification
Product ID:SILVER DOLLAR ALUMINUM ROOF (SEE ING 14)
MSDS Date:09/13/1990
FSC:5610
NIIN:00N012291
MSDS Number: BQPDW
Responsible Party
US
Emergency Phone: 813-248-2101;(800)237-1155
Info Phone: 813-248-2101;(800)237-1155
Cage: GARDN
Contractor
Telephone: 813-248-2101
Cage: GARDN
Ingredients
REUSE. CLEANSE SKIN THOROUGHLY AFTER CONTACT BEFORE
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
FROM SKIN W/ WATERLESS HAND CLEANERS (WASHING
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
FULL LENGTH FACESHIELD TO GOGGLES .
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
USE EXPLOSION-PROOF EQUIP.INTENTIONAL MISUSE BY
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
COATING, 621 (FORMERLY ASBESTOS
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
PETROLEUM ASPHALT
CAS: 8052-42-4
RTECS: CI9905000
Fraction By Weight: <30%
OSHA PEL N/K
ACGIH TLV: 5 MG/M3 FUME
ALUMINUM FLAKE.AS FREE FLAKE (NON-ENCAPSULATED).OSHA PEL 5
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: <10%
OSHA PEL 15 MG(AL)/M3 T DUST
ACGIH TLV: 10 MG(AL)/M3 DUST
CELLULOSIC FIBER.OSHA PEL 5 MG/M3 AS RESPIRABLE FRACTION.
CAS: 9004-34-6
RTECS: FJ5691460
Fraction By Weight: <10%
OSHA PEL 15 MG/M3 TOTAL DUST
ACGIH TLV: 10 MG/M3
PETROLEUM SOLVENTS (VM&P
CAS: 64742-48-9
Fraction By Weight: <40%
OSHA PEL N/K
ACGIH TLV: N/K
INORGANIC FILLERS.AS RESPIRABLE DUST.
Fraction By Weight: <25%
OSHA PEL N/K
ACGIH TLV: N/K
ENTERED/MAY ENTER SEWERS, WATER
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
CAUSE INJURY/DEATH.DO NOT ATTEMPT TO
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
MATL TRANSFER PROCESS.ALL ELEC EQUIP IN
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
REMOVE CONTAMINATED SHOES, THOROUGHLY CLEAN &
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE INH OF VAPORS OF PETRO
SOLVENTS CAN CAUSE ASPHY.PRLNG/RPTD CONTACT CAN CAUSE
DERMATITIS.ASPIRATION HAZARD. REPORTS HAVE ASSOCIATED RPTD & PRLNG
OCCUP OVEREXPOS TO SOLVENTS W/ PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE.INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING
THIS PRODUCT MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:PETRO SOLV & ASPHALT CAN CAUSE SEV
IRRIT,REDNESS,TEARING,BLURRED VISION.SKIN:PRLNG/RPTD CONT OF PETRO
SOLV & ASPHALT CAN IRRIT & DEFAT.INGEST:ASPIR HAZ.INH:EXCESSIVE INH
OF VAP OF PETRO SOLV & AS PHALT CAN CAUSE IRRIT OF
NOSE/THROAT,DIZZINESS,WEAKNESS, FATIGUE,NAUSEA,HEADACHE,POSSIBLE
UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:PERSONS W/ PRE-EXISTING CENTRAL
NERVOUS SYSTEM DISEASE,SKIN DISORDERS/CHRONIC RESPIRATORY DISEASE
SHOULD AVOID EXPOSURE TO THIS PRODUCT.
First Aid
First Aid:EYES:FLUSH W/ LG AMTS OF H2O FOR AT LEAST 15 MIN.GET MED
ATTN.SKIN:REMOVE CONTAM CLTHG,THORO WASH EXPOS AREA W/ SOAP &
H2O.IF IRRIT/REDNESS DEVELOPS,PERSISTS,GET MED ATTN.INGEST:DO NOT
INDUCE VOM-TRAN SPORT TO HOSPITAL IMMED.GET MED ATTN.MDNOTE:GASTRIC
LAVAGE IAW PROC FOR INGEST OF PETRO PROD.INH:REMOVE TO FRESH AIR;IF
BRTHG IS DFCLT, ADMINISTER O2,IF BRTHG STOPPED,GIVE ARTF RESP.KEEP
(SEE SUP)
Fire Fighting
Flash Point:N/K
Lower Limits:0.9% BY VOL
Upper Limits:6.0% BY VOL
Extinguishing Media:DRY CHEMICAL,CARBON DIOXIDE OR UNIVERSAL TYPE FOAM
AND WATER FOG ARE EFFECTIVE BUT MAY CAUSE FROTHING.DO NOT USE H2O.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.FIGHT AS A FUEL OIL FIRE.
Unusual Fire/Explosion Hazard:MAY FORM TOX MATLS:CO2,CO,NITROGEN
OXIDES. HAZ DECOMP PROD:VARIOUS HYDROCARBON COMPOUNDS.AUTOIGNITION
TEMP:>400F, 204.44C.
Accidental Release
Spill Release Procedures:SHUT OFF & ELIM ALL IGNIT SOURCES.KEEP PEOPLE
AWAY.RECOVER FREE PROD.ADD SAND,EARTH/OTHER SUITABLE ABSORB TO
SPILL AREA.MINIMIZE SKIN CONT & BRTHG VAPS.VENTILATE CONFINED
SPACES.OPEN ALL WINDOWS & DOO RS.KEEP PROD OUT OF SEWERS & H2O (SEE
SUPP)
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:KEEP CONTRS TIGHTLY CLSD,COOL,DRY,AWAY
FROM SOURCES OF IGNIT.USE PROD W/ ADEQ VENT.MATL IS COMBUST.MATL
REQ ELEC GROUNDING DURING (SEE ING 8)
Other Precautions:DO NOT STORE NEAR HEAT,SPARKS,FLAME,OPEN
LIGHTS/STRONG OXIDANTS.TO PREVENT FIRE OR EXPLOSION RISK FROM
STATIC ACCUMULATION AND DISCHARGE,EFFECTIVELY GROUND PRODUCT
TRANSFER IAW NFPA STANDARD FOR PETRO PRODUCTS.NO SMOKING.(SEE ING
13)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED SUPPLIED AIR RESPIRATOR
IN CONFINED OR ENCLOSED SPACES,IF NEEDED.
Ventilation:USE ONLY W/ VENT SUFFICIENT TO PRVNT EXCEEDING REC EXPOS
LIM/ BUILDUP OF EXPLO CONC OF VAP IN AIR.
Protective Gloves:CHEM RESIST TO AVOID PRLNG/RPTD CONT.
Eye Protection:CHEM WORKERS GOG.MAY ADD (SEE ING 12)
Other Protective Equipment:CHEM RESIST APRON/OTHER IMPERVIOUS CLTHG TO
AVOID CONTAM REGULAR CLTHG WHICH COULD RESULT IN PRLNG/RPTD SKIN
CONTACT.
Work Hygienic Practices:AVOID BRTHG VAP/MIST.AVOID PRLNG/RPTD CONT W/
SKIN.REMOVE CONTAM CLTHG,LAUNDER/DRY CLEAN BEFORE REUSE.(SEE ING 9)
Supplemental Safety and Health
POURING TEMP: 40F,4.44C.VP: 6 MMHG 106F, 41.11C (EST).SPEC
GRAV:1.00-1.10,H2O=1.VISC:THICK COATING CONSISTENCY (<100 SEC
STORMER VISCOMETER).MATLS TO AVOID:CONT W/ H2O CAN RELEASE FLAM
HYDROGEN GAS.FI RST AID PROC:PERS WARM,QUIET.GET MED ATTN.SPILL
PROC:COURSES BY DIKING/IMPOUNDING.ADVISE AUTH IF PROD HAS (SEE ING
6)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:SEE SUPP
Vapor Density:3.9,AIR=1
Spec Gravity:SEE SUPP DATA
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:MODERATELY THICK COATING W/ PETRO HYDROCARB SOLV
ODOR;SILVER METALLIC APPEAR.
Percent Volatiles by Volume:<50
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONT WITH STRONG OXIDIZING AGENTS (LIQ CHLORINE, CONC O2,SODIUM
HYPOCHLORITE/CALCIUM HYPOCHLORITE).(SEE SUPP)
Stability Condition to Avoid:AVOID SOURCES OF IGNITION.
Hazardous Decomposition Products:NITROGEN OXIDES, CARBON DIOXIDE,
CARBON MONOXIDE, AND VARIOUS HYDROCARBON COMPOUNDS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISP MUST BE IAW FED,STATE & LOCAL REGS .
"EMPTY" CONTRS RETAIN RESIDUE (LIQ AND/OR VAP) & CAN BE
DANGEROUS.DO NOT PRESSURIZE,CUT,WELD,BRAZE,SOLDER,DRILL,GRIND/EXPOS
CONTRS TO HEAT,FLAME, SPK,OT HER SOURCES OF IGNIT,MAY EXPLODE &
(SEEING 7)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.